Bar's Leaks Logo


Register | Recover Password
Filter by Custom Post Type
Exact matches only
Search in title
Search in content
Search in comments
Search in excerpt
Filter by Product Type
Combustion Chamber Cleaner
Engine/Motor Oil
Fuel System
Head Gasket & Block
Interior & Exterior Cosmetic
Motor Bike / ATV
Power Steering
Radiator & Cooling System
Stop Leaks Solutions
Tire & Rubber
Filter by Categories

Experiment – Tin Can Demonstration


Simple Experiment w/Tin Can

While we have a video Demonstration for Rhizex, there is a much easier way for customers to see Rhizex work for themselves. For nearly a half-century the Tin Can Demonstration has been uses to exhibit the efficacy of Rhizex, the “active” ingredient in Bar’s Leaks radiator stop leak products. Here is how you con conduct your own test or demonstration:

  1. Place some Rhizex into a glass bottle with water (hot water preferable).
  2. Wait 1 to 2 minutes until the pellets to completely dissolve into the water. Shaking the bottle will hasten the dissolution.
  3. Prepare a metal can with a crack or small hole on its side. Fill the can with water and see the water leaking. This simulates the leaking cooling system.
  4. Shake the glass bottle with Bar’s Leaks Rhizex well and pour it into the leaking can. Stir with a stick and see the leaking stop. Stirring simulates hot water circulating very fast in the cooling system.
  5. Prepare a wire screen (between 30 – 40 mesh) and pour the contents of the metal can on the screen. Bar’s Leaks will leave no residue on the screen.
  6. If there are any other brands of stop-leak products in your market, follow the same procedure as described above with these other brands. They will also stop leaks, but there will be an accumulation of residue which actually can plug up the radiator core or other parts of cooling system. Some competitive stop-leak products will even stick to the can or glass bottle! Compare the residue material on the screen with that of Bar’s Leaks. Auto manufacturers specify that any non-soluble particles to pass through at a minimum of a 28 mesh screen.

Note: The size of cracks of holes should be small, because there is no product available that will handle large puncture holes. In this case, a car owner has to repair or replace his cooling system parts.

The reason that Rhizex passes through the mesh screen is that Rhizex consists of very small particles that do not stick to cores or radiator surface. These particles circulate in the cooling system until each particle finds a hole and builds up inward toward the center of the opening. As the particles come in contact with the outside air, they expand approximately 15%.

Download: Bars Leaks TIn Can Demonstration